The MAX1638 is an ultra-high-performance, step-down DC-DC controller for CPU power in high-end computer systems. Designed for demanding applications in which output voltage precision and good transient response are critical for proper operation, it delivers over 35A from 1.3V to 3.5V with ±1% total accuracy from a +5V ±10% supply. Excellent dynamic response corrects output transients caused by the latest dynamically clocked CPUs. This controller achieves over 90% efficiency by using synchronous rectification. Flying-capacitor bootstrap circuitry drives inexpensive, external N-channel MOSFETs.

The switching frequency is pin-selectable for 300kHz, 600kHz, or 1MHz. High switching frequencies allow the use of a small surface-mount inductor and decrease output filter capacitor requirements, reducing board area and system cost.

The MAX1638 is available in 24-pin SSOP and QSOP (future package) packages, and offers additional features such as a digitally programmable output; adjustable transient response; and selectable 0.5%, 1%, or 2% AC load regulation. Fast recovery from load transients is ensured by a GlitchCatcher™ current-boost circuit that eliminates delays caused by the buck inductor. Output overvoltage protection is enforced by a crowbar circuit that turns on the low-side MOSFET with 100% duty factor when the output is 200mV above the normal regulation point. Other features include internal digital soft-start, a power-good output, and a 3.5V ±1% reference output.

• MAX3882A - 2.488Gbps 1:4解复用器，带有时钟和数据恢复及限幅放大器
• DS8023 - 智能卡接口
• MAX1573 - 白光LED、1倍/1.5倍电荷泵，UCSP封装和薄型QFN封装
• DG200A - 双路、单片SPST、CMOS模拟开关
• DS2502-E64 - IEEE EUI-64节点地址芯片
• MAX1174 - 14位、135ksps、单电源ADC，双极性模拟输入范围
• DG509A - 单芯片CMOS模拟多路复用器
• MAX5130 - +3V/+5V、13位、串行、电压输出DAC，内置电压基准
• DS1210 - 非易失控制器芯片
• MAX4580 - 1.25Ω、双路SPST、CMOS模拟开关