The MAX406/MAX407/MAX409/MAX417–MAX419 are single, dual, and quad low-voltage, micropower, precision op amps designed for battery-operated systems. They feature a supply current of less than 1.2µA per amplifier that is relatively constant over the entire supply range, which represents a 15 to 20 times improvement over industry-standard micropower op amps. A unique output stage enables these op amps to operate at ultra-low supply current while maintaining linearity under loaded conditions. In addition, the output is capable of sourcing 1.8mA when powered by a 9V battery.

The common-mode input-voltage range extends from the negative rail to within 1.1V of the positive supply (for the singes, 1.2V for the duals and quads), and the output stage swings rail-to-rail. The entire family is designed to maintain good DC characteristics over the operating temperature range, minimizing the input referred errors.

The MAX406 is a single op amp with two modes of operation: compensated mode and decompensated mode. Floating BW (pin 8) or connecting it to V- internally compensates the amplifier. In this mode, the MAX406 is unity-gain stable with a 5V/ms typical slew rate and an 8kHz gain bandwidth. Connecting BW to V+ puts the MAX406 into decompensated mode with a 20V/ms typical slew rate and a 40kHz gain bandwidth (AVCL ≥ 2V/V).

The dual MAX407 and quad MAX418 are internally compensated to be unity-gain stable. The MAX409/MAX417/MAX419 single/dual/quad op amps feature 150kHz typical bandwidth, 75V/ms slew rate, and stability for gains of 10V/V or greater.

• MAX267 - 引脚可编程的通用及带通滤波器
• DS3232 - 超高精度、I²C RTC，集成晶体和SRAM
• MAX3319E - ±15kV ESD保护、2.5V、1µA、460kbps、RS-232兼容收发器
• MAX9276 - 3.12Gbps GMSL解串器，用于同轴或STP输入及并行输出
• MAX549A - +2.5V至+5.5V、低功耗、单/双路、8位、电压输出DAC，µMAX封装
• MAX6779 - 低功耗、精度达1%的电池监测器，提供µDFN和SC70封装
• MAX9254 - 21位解串器，提供可编程扩频和直流平衡
• MAX1846 - 高效率、电流模式、反相PWM控制器
• MAX11135 - 500ksps、低功耗、串行12/10/8位、4/8/16通道ADC
• MAX6021A|MAX6021B - 高精度、低功耗、低压差、SOT23-3封装、电压基准