The MAX501/MAX502 are 12-bit, 4-quadrant, voltage-output, multiplying digital-to-analog converters (DACs) with an output amplifier. Thin-film resistors, laser trimmed at the wafer level, maintain accuracy over the full operating temperature range.

The MAX501/MAX502 have buffered latches that are easily interfaced with microprocessors. Data is transferred into the input register in either a right-justified 8 + 4-bit format (MAX501) or with a 12-bit-wide data path (MAX502). In the MAX501, an active-low LDAC signal transfers data from the input register to the DAC register. In the MAX502, the input registers are controlled by standard active-low CHIP SELECT (active-low CS) and active-low WRITE (active-low WR) signals. For stand-alone operation, the active-low CS and active-low WR inputs are grounded, making all latches transparent. All logic inputs are level triggered and compatible with TTL and +5V CMOS logic levels. The internally compensated, low-input offset-voltage output amplifier provides an output voltage from +10V to -10V while sourcing and sinking up to 5mA.

• MAX1680 - 125mA、频率可选、开关电容电压变换器
• MAX5322 - ±10V、双通道、12位、串行、电压输出DAC
• MAX6776 - 低功耗、精度达1%的电池监测器，提供µDFN和SC70封装
• MAX14566E - USB主机充电器识别模拟开关
• MAX1286 - 150ksps、12位、双通道单端及单通道真差分ADC
• MAX5385 - 低成本、低功耗、8位DAC，带有3线串行接口，SOT23封装
• MAX5190 - 8位、40MHz、电流/电压输出DAC
• DS1982U - UniqueWare iButton器件
• MAX3218 - 1µA、1.8V至4.25V、RS-232收发器，带有AutoShutdown
• MAX5098A - 双通道、2.2MHz、汽车buck或boost转换器，具有80V抛负载保护